ParameterParameter DescriptionenclosurePostions A list of all of the enclosure IDs. The sequence of theenclosure IDs in the list defines the positions for the RAIDenclosure and the expansion enclosures in a storagearray. Valid values are 0 to 99. Enter the enclosure IDvalues separated by a space. Enclose the list of enclosureID values in parentheses. For storage arrays where theRAID enclosure has a predefined identifier that is not inthe range of valid enclosure position values, use thecontroller value.Additional InformationThis command defines the position of an enclosure in a storage array by the position of the enclosure ID in theenclosurePositions list. For example, if you have a RAID enclosure with an ID set to 84 and expansionenclosures with IDs set to 1, 12, and 50, the enclosurePositions sequence (84 1 12 50) places the RAIDenclosure in the first position, expansion enclosure 1 in the second position, expansion enclosure 12 in the third position,and expansion enclosure 50 in the fourth position. The enclosurePositions sequence (1 84 50 12) places theRAID enclosure in the second position, expansion enclosure 1 in the first position, expansion enclosure 50 in the thirdposition, and expansion enclosure 12 in the fourth position.NOTE: You must include all of the enclosures in the storage array in the list defined by theenclosurePositions parameter. If the number of enclosures in the list does not match the total number ofenclosures in the storage array, an error message is shown.Set Storage Array ICMP ResponseThis command returns the default values for negotiable settings for sessions and connections, which represent thestarting point for the storage array for negotiations.Syntaxset storageArray icmpPingResponse=(TRUE | FALSE)ParameterParameter DescriptionicmpPingResponse This parameter turns on or turns off Echo Requestmessages. Set the parameter to TRUE to turn on EchoRequest messages. Set the parameter to FALSE to turnoff Echo Request messages.Set Storage Array iSNS Server IPv4 AddressThis command sets the configuration method and address for an IPv4 Internet Storage Name Service (iSNS).Syntaxset storageArray isnsIPv4ConfigurationMethod=[static | dhcp]isnsIPv4Address=ipAddressParameter184
