Parameter DescriptionisnsIPv4Address The IP address that you want to use for the iSNS server.Use this parameter with the static value for IPv4configurations. If you choose to have a DHCP server setthe IP address for an IPv4 Internet iSNS server, you mustset the isnsIPv4Address parameter to 0.0.0.0.Set Storage Array iSNS Server IPv6 AddressThis command sets the IPv6 address for the iSNS server.Syntaxset storageArray isnsIPv6Address=ipAddressParameterParameter DescriptionisnsIPv6Address The IPv6 address that you want to use for the iSNS server.Set Storage Array iSNS Server Listening PortThis command sets the iSNS server listening port.Syntaxset storageArray isnsListeningPort=listeningPortIPAddressParameterParameter DescriptionisnsListeningPort The IP address that you want to use for the iSNS serverlistening port. The range of values for the listening port is49152 to 65535. The default value is 3205.Additional InformationA listening port resides on the database server and is responsible for these activities:• Listening (monitoring) for incoming client connection requests• Managing the traffic to the serverWhen a client requests a network session with a server, a listener receives the actual request. If the client informationmatches the listener information, then the listener grants a connection to the database server.Set Storage Array Learn CycleThis command sets the learn cycle for the battery backup unit. The learn cycle enables the MD storage managementsoftware to predict the remaining battery life. Learn cycles run at set intervals and store the results forsoftware analysis.Syntaxset storageArray learnCycleDate(daysToNextLearnCycle=numberOfDays |day=dayOfTheWeek) time=HH:MM185
