Parameter DescriptionhealthStatus Displays the health, logical properties, and physicalcomponent properties of the storage array.hostTypeTable Displays a table of all host types known to the RAIDcontroller module. Each row in the table displays a hosttype index and the platform the index represents.hotSpareCoverage Displays information about which virtual disks of thestorage array have hot spare coverage and which virtualdisks do not.features Displays a list of the feature identifiers for all enabledfeatures in the storage array.time Displays the current time to which both RAID controllermodules in the storage array are set.virtualDiskDistribution Displays the current RAID controller module owner foreach virtual disk in the storage array.summary Returns a concise list of information about the storagearray configuration.longRunningOperations Shows the long running operations for each disk groupand each virtual disk in the storage array.The longRunningOperation parameter returns thisinformation:• Name of the disk group or virtual disk• Long running operation• Status• % complete• Time remainingNOTE: When you save the information to a file, you can use the information as a record of your configuration andas an aid during recovery.Show Storage Array Auto ConfigureThis command shows the default autoconfiguration that the storage array creates if you issue the autoConfigurestorageArray command. To determine whether the storage array can support specific properties, enter theparameter for the properties when you issue this command. You do not, however, need to enter any parameters for thiscommand to return configuration information. If you do not specify any properties, this command returns the RAID 5candidates for each physical disk type. If RAID 5 candidates are not available, this command returns candidates forRAID 1 or RAID 0. In order to view the RAID 6 autoConfiguration options, you must specify the raidLevel option.When you specify auto-configuration properties, the RAID controller modules validate that the firmware can support theproperties.Syntaxshow storageArray autoConfiguration[physicalDiskType=(SAS)raidLevel=(0 | 1 | 5 | 6)diskGroupWidth=numberOfPhysicalDisks diskGroupCount=numberOfDiskGroupsvirtualDisksPerGroupCount=200
