Show Storage Array Unreadable SectorsThis command returns a table of the addresses of all of the sectors in the storage array that cannot be read. The table isorganized with column headings for the following information:• Virtual disk user label• Logical unit number (LUN)• Accessible by (host or host group)• Date/time• Virtual disk-relative logical block address (hexadecimal format – 0xnnnnnnnn)• Physical disk location (enclosure t, slot s)• Physical disk-relative logical block address (hexadecimal format – 0xnnnnnnnn)• Failure typeThe data is sorted first by the virtual disk user label and second by the logical block address (LBA). Each entry in thetable corresponds to a single sector.Syntaxshow storageArray unreadableSectorsParametersNone.Show StringThis command shows a string of text from a script file. This command is similar to the echo command in MS-DOS andUNIX.Syntaxshow “textString”ParametersNone.NOTE: You must enclose the string in double quotation marks (“ ”).Show Virtual DiskFor the virtual disks in a storage array, this command returns the following information:• The number of virtual disks• The name• The status• The capacity• The RAID level• The disk group where the virtual disk is located• Details:– The virtual disk ID– The subsystem ID203
