Dell PowerVault ML6000 User Manual

Also see for PowerVault TL2000: Getting started guide Faq Quick start guide User guide Release notes

Contents

Error: Unable to find Secretkey in the config keystore withalias:MyKey.The symmetricKeySet entry in properties file is contains a key alias that does notexist in the config.keystore.fileTo correct this problem, modify the symmetricKeySet entry in the configuration fileto only contain aliases that exist in the keystore file designated by theconfig.keystore.file entry in KeyManagerConfig.properties OR add the missingsymmetric key to the keystore. See Appendix B, “Encryption Key ManagerConfiguration Properties Files” for more information.No symmetric keys in symmetricKeySet, LTO drives cannot besupported.This is an information message. The Encryption Key Manager server will still start,but LTO drives cannot be supported on this instance of Encryption Key Manager.This is not a problem if there are no LTO drives configured to communicate withthis Encryption Key Manager.Encryption Key Manager-Reported ErrorsThis section defines error messages that are reported by the Encryption KeyManager and returned in the drive sense data. They are typically called faultsymptom codes or FSCs. The table includes the error number, a short descriptionof the failure, and corrective actions. Refer to Appendix B, Default ConfigurationFile, for information on specifying the debug property.Table 6-1. Errors that are reported by the encryption key managerError Number Description ActionEE02 Encryption Read Message Failure:DriverErrorNotifyParameterError: ″Bad ASC& ASCQ received. ASC & ASCQ does notmatch with either of Key Creation/KeyTranslation/Key Aquisition operation.″The tape drive asked for an unsupportedaction. Ensure that you are running the latestversion of the Encryption Key Manager(refer to “Downloading the Latest VersionKey Manager ISO Image” on page 3-1 todetermine the latest version). Check theversions of drive or proxy server firmwareand update them to the latest release, ifneeded. Enable debug tracing on the keymanager server. Try to recreate the problemand gather debug logs. If the problempersists, refer to “Contacting Dell” in the“Read this First” section at the front of thispublication for information on gettingtechnical assistance.Chapter 6. Problem Determination 6-5||