ExplanationSync operation to synchronize the data between two Encryption Key Managerservers failed.Operator ResponseMake sure IP address specified for remote Encryption Key Manager server iscorrect and that computer is accessible. Make sure configuration file exists andcontains correct drive table information. Check the sync command syntax usinghelp. Check the logs for more information.The Specified Audit Log File is Read OnlyTextThe audit log file can not be opened for writing.ExplanationAudit log file in the Encryption Key Manager configuration specified by theproperty Audit.handler.file.name cannot be opened for writing.System ResponseThe Encryption Key Manager does not start.Operator ResponsePlease check the permissions on the given audit file and directory and tryrestarting the Encryption Key Manager.Unable to Load the Admin KeystoreTextKeystore for Admin cannot be loaded.ExplanationAdmin keystore supplied to the Encryption Key Manager cannot be loaded. Adminkeystore is used between Encryption Key Manager servers for server sidecommunication in multi-server environment.System ResponseThe Encryption Key Manager does not start.Operator ResponseCheck the configuration file setup. Make sure the properties admin.keystore.file,admin.keystore.provider and admin.keystore.type in the Encryption KeyManager configuration file are correct (refer to Appendix B) and the keystore fileexists and has read permission. Make sure the password supplied for adminkeystore either through admin.keystore.password property or entered on thecommand line is correct. Try restarting the Encryption Key Manager.Chapter 6. Problem Determination 6-15
