Dell SonicWALL Secure Mobile Access 8.5Administration Guide 108SNMP SettingsThe SNMP Settings section allows the administrator to enable SNMP and specify SNMP settings for the appliance.A list of downloaded MIBs is displayed to the right of the fields. MIBs can be downloaded from MySonicWALL.GMS SettingsThe GMS Settings section allows the administrator to enable GMS management, and specify the GMS host nameor IP address, GMS Syslog server port and heartbeat interval (in seconds).Configuring Login SecuritySMA/SRA appliance login security provides an auto lockout feature to protect against unauthorized loginattempts on the user portal. Complete the following steps to enable the auto lockout feature:1 Navigate to System > Administration.2 Select Enable Administrator/User Lockout.3 In the Maximum Login Attempts Per Minute field, type the number of maximum login attemptsallowed before a user is locked out. The default is five attempts. The maximum is 99 attempts.4 In the Lockout Period (minutes) field, type a number of minutes to lockout a user that has exceededthe number of maximum login attempts. The default is five minutes. The maximum is 9999 minutes.5 Click Accept to save your changes.Configuring HTTP DOS SettingsHTTP DPS setting is used to configure the maximum concurrent TCP connections per IP address. Complete thefollowing steps to change the maximum number of connections at any one time:1 Navigate to System > Administration.2 In the Max Concurrent TCP connections Per IP field, type the maximum number of concurrent TCPconnections a client can open with the Secure Mobile Access web server. The default is 20 and themaximum is 100 connections.Configuring Web Management SettingsThe Web Management Settings section allows the administrator to set the default page size for paged tables andthe streaming update interval for dynamically updated tables in the Secure Mobile Access managementinterface.To set the table page size and streaming update interval:1 In the Default Table Size field, enter the number of rows per page for paged tables in the Secure MobileAccess management interface. The default is 100, the minimum is 10, and the maximum is 99,999.2 In the Streaming Update Interval field, enter the number of seconds between updates for dynamicallyupdated tables in the Secure Mobile Access management interface. The default is 10, the minimum is 1,and the maximum is 99,999.3 Click Accept to save your changes.