152 Network Administration: VLANFILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Astute\UserGuide\Dell_Astute_Network_Admin_VLAN.fmD E L L C O N F I D E N T I A L – P R E L I M I N A R Y 8 / 9 / 1 6 - F O R P R O O F O N L YDefining Protocol GroupsDefine a protocol group by performing the following steps:1 Define a protocol group by assigning one or more protocols to the groupand giving it a protocol-group ID (any integer), using the Protocol Grouppage.2 Associate the group with a desired VLAN classification, per port, using theProtocol Port page.To define a protocol group:1 Click Network Administration > VLAN > Standard VLAN >ProtocolGroup.The currently-defined protocol groups are displayed.2 Click Edit, Add and enter the fields:– Frame Type — Select a frame type to be accepted in the protocolgroup.– Protocol Value — Select a protocol name.or– Ethernet-Based Protocol Value (0600 - FFFF) — Enter the Ethernetprotocol group type.– Protocol Group ID — Assign a protocol group ID number.Protocol PortA protocol port is a port assigned to a particular protocol group. Traffic fromparticular types of frames can be assigned to a protocol group, which has aport and VLAN associated with it. The VLAN must be created before theprotocol group can be created.To add an interface to a protocol group:1 Click Network Administration > VLAN > Standard VLAN > ProtocolPort.A list of previously-defined protocol groups is displayed.2 Click Edit, Add, and enter the fields:– Interface Type — Select either Port or LAG.– Interface — Select the interface to be added to a protocol group.
