Network Administration: Link Layer Discovery Protocol (LLDP) 211FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Astute\UserGuide\Dell_Astute_Network_Admin_LLDP.fmD E L L C O N F I D E N T I A L – P R E L I M I N A R Y 8 / 9 / 1 6 - F O R P R O O F O N L Y2 Click Edit, Add, and enter the fields:– Network Policy Number — Select an available network policynumber.– Application — Select the application (type of traffic) for which thenetwork policy is defined.– VLAN ID — Enter the VLAN ID to which the traffic should be sent.– VLAN Type —Select whether the traffic is Tagged or Untagged.– User Priority — Select the traffic priority assigned to the networkapplication.– DSCP Value — Select the value to be used by neighbors to mark thetraffic sent to the switch.MED Port SettingsTo assign MED network policies to ports:1 Click Network Administration > Link Layer Discovery Protocol (LLDP)> MED Port Settings.2 The following fields are displayed for each port:– LLDP MED Status — Specifies if LLDP-MED is enabled on theselected port.– Network Policy — Specifies whether a network policy is assigned tothe port.– Location — Specifies whether the location is advertised.– PoE — Specifies whether PoE is enabled on the port3 To modify network policies on a port, click Edit.4 Select the port to be configured, and enter the fields for the port:– Enable LLDP-MED — Enable/disable LLDP-MED on the port.– Available TLVs — Contains a list of available TLVs that can beadvertised by the port. The possible options are:• Network Policy — Advertises the network policy attached to theport.• Location — Advertises the port’s location.
