Network Administration: Multicast 297FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Astute\UserGuide\Dell_Astute_Network_Admin_Multicast.fmD E L L C O N F I D E N T I A L – P R E L I M I N A R Y 8 / 9 / 1 6 - F O R P R O O F O N L YMLD SnoopingTo enable MLD Snooping and configure it on a VLAN:1 Click Network Administration > Multicast > MLD Snooping.2 Enable or disable MLD Snooping Status. When MLD Snooping isglobally enabled, the device monitoring network traffic can determinewhich hosts have requested to receive Multicast traffic. The deviceperforms MLD Snooping only if both MLD snooping and Bridge Multicastfiltering are enabled.The MLD snooping information for the VLANs on the switch is displayed.3 To enable MLD Snooping on a VLAN, click Edit.4 Select a VLAN, click its Enter icon and enter the fields:• MLD Snooping Status—Enable or disable MLD snooping on theVLAN. The device monitors network traffic to determine which hostshave asked to be sent Multicast traffic. The device performs MLDsnooping only when MLD snooping and Bridge Multicast filtering areboth enabled• Operational MLD Snooping Status—Displays the current status ofMLD Snooping for the selected VLAN.• MRouter Ports Auto-Learn—Enable or disable Auto Learn for theMulticast router.• Query Robustness —Enter the robustness variable value to be used ifthe device cannot read this value from messages sent by the electedquerier.• Operational Query Robustness—Displays the robustness variablesent by the elected querier.• Query Interval (Sec)—Enter the Query Interval value to be used bythe device if the device cannot derive the value from the messagessent by the elected querier.• Operational Query Interval (Sec) —The time interval in secondsbetween General Queries received from the elected querier.• Query Max Response Interval (Sec)—Enter Query Max Responsedelay to be used if the device cannot read the Max Response Timevalue from General Queries sent by the elected querier.
