CLI 361FILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Astute\UserGuide\Dell_Astute_CLI_new.fmD E L L C O N F I D E N T I A L – P R E L I M I N A R Y 8 / 9 / 1 6 - F O R P R O O F O N L YThe IP stack is always running on the OOB port as an IP host regardless whetherIP routing is enabled.The switch blocks routing between in-band interfaces and the OOB interface.In the case when there are two best routes - one via an in-band and one via theOOB port, the switch will use the route via the OOB port.DHCP Relay and IP Helper cannot be enabled on the OOB port.ExampleThe following example enables IP routingconsole(config)# ip routingip ssh serverThe ip ssh server Global Configuration mode command enables the device tobe an SSH server and so to accept connection requests from remote SSH clients.Remote SSH clients can manage the device through the SSH connection.Use the no form of this command to disable the SSH server functionality fromthe device.Syntaxip ssh serverno ip ssh serverDefault ConfigurationThe SSH server functionality is disabled by default.Command ModeGlobal Configuration modeUser GuidelinesThe device, as an SSH server, generates the encryption keys automatically.To generate new SSH server keys, use the crypto key generate dsa and cryptokey generate rsa commands.
