286 Network Administration: SNMP MonitoringFILE LOCATION: C:\Users\gina\Desktop\Checkout_new\Dell Astute\UserGuide\Dell_Astute_Network_Admin_SNMP.fmD E L L C O N F I D E N T I A L – P R E L I M I N A R Y 8 / 9 / 1 6 - F O R P R O O F O N L YNotification FilterNotification filters determine the type of SNMP notifications that are sent tothe management station, based on the OID of the notification to be sent.Each OID is linked to a device feature or a feature aspect.SNMP notification filters provide the following services:• Identification of management trap targets• Trap filtering• Selection of trap generation parameters• Access control checksAfter creating a notification filter, attach it to a notification recipient in theSNMPv1,2 Notification Recipients pages.To add a notification filter:1 Click Switch Management > SNMP Monitoring > Notification Filter.2 Click Edit and select Settings Icon ( ), for the New Filter configurationpage.3 Enter the Filter Name of the new filter and save it.4 To configure the notification filter, click Edit.5 Select the filter in the Filter Name list.6 Click Edit.7 Click New Object ID Subtree and the following fields:– New Object Identifier Tree — Check to specify the device featureOID included or excluded in the selected SNMP view.• Select from List — Select the device feature OID by using the Upand Down buttons to scroll through a list of all device OIDs.or:• Object ID — Specify the device feature OID.8 If required, change the notification filter type by selecting one of thefollowing options:– Included — OID traps or informs will be sent.– Excluded — OID traps or informs will not be sent.
