Back to Contents PageInternal Card With Bluetooth Wireless TechnologyDell™ XPS™ M2010 Service ManualRemoving the Internal Card with Bluetooth Wireless TechnologyReplacing the Internal Card with Bluetooth Wireless TechnologyCAUTION: Before you begin the following procedure, follow the safety instructions in the ProductInformation Guide.NOTICE: To prevent static damage to components inside your computer, discharge static electricity from your bodybefore you touch any of your computer's electronic components. You can do so by touching an unpainted metalsurface. If you leave the area, ground yourself again when you return to the computer.Removing the Internal Card with Bluetooth Wireless TechnologyNOTICE: To help prevent damage to the system board, remove the main battery before working inside the computer.1. Follow the instructions in Before Working Inside Your Computer, including removing the system battery.2. With the computer still turned over, remove the subwoofer cover (see Removing the Subwoofer).3. The internal card with Bluetooth wireless technology is adhered to the subwoofer. To remove the card, pry it off thesubwoofer, and disconnect the cable attached to the card.1 subwoofer 2 internal card with Bluetooth wirelesstechnology3 cable connected to the internalcardReplacing the Internal Card with Bluetooth Wireless TechnologyNOTE: The internal card with Bluetooth wireless technology is adhered to the subwoofer. To replace the card, you willneed to pry it from the subwoofer and adhere a new card.1. Connect the cable to the new internal card with Bluetooth wireless technology.