Dell XPS M2010 Service Manual

Also see for XPS M2010: Setup guide Owner's manual Setup guide Service manual Owner's manual

1 video card/thermal-coolingassembly2 captive screws(4)3 system board connector(JVGA)NOTE: The video card is integrated with its thermal assembly. Do not remove the heatsink from the video card.9. Pull the video card/thermal-cooling assembly straight up to disconnect the card from the system board.Replacing the Video Card/Thermal-Cooling Assembly1. Align the video card/thermal-cooling assembly over the connector and screw holes on the system board.2. Press down on the "PUSH HERE" label on the video card/thermal-cooling assembly.3. Tighten in consecutive order the four captive screws, labeled "1" through "4", on the video card/thermal-coolingassembly.4. Connect the video cable to the connector on the video card.5. Replace the right hard drive (see Replacing a Hard Drive).6. Replace the top cover (see Replacing the Top Cover).7. Replace the cosmetic covers (see Replacing the Cosmetic Covers).NOTICE: To avoid damage to the keyboard, ensure that you attach the keyboard securely before moving thecomputer.8. Firmly attach the keyboard to the computer and close the display (see Closing the Display).9. Turn the computer upside down and replace the system battery (see Replacing the System Battery).