1 notch in swing arm (2) 2 tab on optical drive assembly (2) 3 optical drive cableRemoving Media from the Optical DriveIf media becomes stuck in the optical drive, you can retrieve the media by opening the drive.1. Remove the optical drive assembly (see Removing the Optical Drive Assembly.)2. Remove the optical drive from the optical drive assembly by removing the four M2.0-mm shoulder screws that hold theoptical drive to the assembly.1 M2.0-mm shoulder screws (4) 2 optical drive 3 optical drive assembly3. Lift the optical drive out of the assembly.4. Remove the two drive rails from the optical drive by removing the two M2 x 3-mm screws in each drive rail.