Dell XPS M2010 Service Manual

Also see for XPS M2010: Setup guide Owner's manual Setup guide Service manual Owner's manual

Back to Contents PageWireless USB BoardDell™ XPS™ M2010 Service ManualRemoving the Wireless USB BoardReplacing the Wireless USB BoardCAUTION: Before you begin the following procedure, follow the safety instructions in the ProductInformation Guide.CAUTION: Only products approved for use in your portable computer may be installed.NOTICE: To prevent static damage to components inside your computer, discharge static electricity from your bodybefore you touch any of your computer's electronic components. You can do so by touching an unpainted metalsurface. If you leave the area, ground yourself again when you return to the computer.The wireless USB board provides the wireless connection for the remote controller.Removing the Wireless USB BoardNOTICE: To help prevent damage to the system board, remove the main battery before working inside the computer.1. Follow the instructions in Before Working Inside Your Computer, including removing the system battery.2. Turn the computer over and open the display (see Opening the Display).3. Detach the keyboard by grasping the sides of the keyboard and pulling it straight out from the computer base. Set thekeyboard aside.4. Remove the cosmetic covers (see Removing the Cosmetic Covers).5. Remove the top cover (see Removing the Top Cover).6. Disconnect the wireless USB cable from the system board.7. Remove the wireless USB board by removing the M2 x 3-mm screw.1 wireless USB cable connector 2 M2 x 3-mm screw 3 wireless USB board