Denon AVR-1707 Operating Instructions Manual

Also see for AVR-1707: Service manual Service manual Operating instructions Brochure & specs Dimensions

Contents

Easy Setup Procedure Easy Setup ProcedureENGLISH10ENGLISHAuto SetupThe AVR-1707’s auto setup use the attached microphone to measurethe acoustic properties in the room and automatically make theoptimum settings.• To make the sound field settings manually ( page 45).q Connecting a microphoneConnect the attached setup microphone to MIC>.Mount the setup microphone on a camera tripod, etc.,and set with the receptor pointing towards the ceiling.MicrophonePlace the setup microphone’s sound receptor at the height of theears in the listening position.It is not possible to measure properly if there are any obstaclesbetween the speakers and microphone. Check that there are noobstacles.About the button names in this explanation< > : Buttons on the main unit[ ] : Buttons on the remote control unitButton name only :Buttons on the main unit and remote control unitSound receptor12Press or [ON/SOURCE].• The power indicator blinks green and the power turns on.Press .£ OFF:The power turns off and the indicator is off.¢ ON:The power indicator lights red.Turn on your subwoofer.Set the volume to halfway and set the crossover frequency tothe maximum or Low pass filter off if your subwoofer can adjustthe output volume and the crossover frequency.Some subwoofers have a standby mode. Be sure to turn thisfunction off before performing the Auto Setup procedure.Turn on your monitor.w Before performing the Auto Setup procedure1234Set [MODE SELECTOR 1] to “AUDIO”.5• Auto Setup mode is not displayed when using headphones.e Switching the front speakerPress to select the front speaker (Front A,Front B or Front A+B).[MODE SELECTOR 1][ON/SOURCE]D H F GD H F G D H F G