Advanced Operation Advanced OperationENGLISH36ENGLISHWhen the ZONE2 SOURCE function is set to“TUNER”, the preset channel can be selected pressing[CHANNEL].Press [INPUT SELECTOR].The ZONE2 source switches directly.The output level of the ZONE2 SPEAKER OUTterminals can be controlled pressing [VOLUME].Default setting (ZONE2 volume level):– – – dB (Minimum)456Set [MODE SELECTOR 1] to the “AUDIO”.Press [ZONE2 ON].• The ZONE2 indicator lights.To cancel the ZONE2 mode:Press [ZONE2 OFF].13Remote control unit operations during multi-source playback (selecting the source)This is only possible when the main unit in the ZONE2 mode (page 43).Set [MODE SELECTOR 2] to the “ZONE2”.2Multi zone music entertainment system• ZONE2 speaker out can be used when “ZONE2” is selected at “Power Amp Assignment”. In this case, surround back speaker out cannotbe used for MAIN ZONE.• When a sold separately room-to-room remote control unit (DENON RC-616, 617 or 618) is wired and connected between the MAIN ZONEand ZONE2, the remote-controllable devices in the MAIN ZONE can be controlled from ZONE2 using the remote control unit.• For instructions on installation and operation of separately sold devices, refer to the devices’ operating instructions.• The main zone output can be turned on and off with MAIN button.¢ When using the SURR.BACK/ZONE2 amplifier as the ZONE2• To use the ZONE2, turn on the ZONE2 button.• The output of the ZONE2 SPEAKER OUT terminals can be adjusted with the remote control unit’s ZONE2 VOLUME button.[System configuration and connections example]Using this unit’s internal amplifier as the ZONE2.AVR-1707DVD playerInputRC-616MonitorMAIN ZONE 5.1-channel systemsZONE2 SPEAKER OUTSYSTEM REMOTECONTROL UNIT RC-1048CFL FRSLSWSRBRC-617PROGRAMMABLEREMOTE CONTROL UNITZONE2: Speaker cable: Room-to-room remote control system (separately sold)control lineRefer to “Connections” ( page 17, 18).