|
Basic Operation Basic OperationENGLISH20ENGLISHTurning the sound off temporarily (MUTING)Press [MUTING].You can adjust the muting level ( page 44).• Canceling MUTING mode:To cancel the muting mode, either press [MUTING] or adjust thevolume.Connect the headphones to .• No sound is produced from the speakers automatically.NOTE:• To prevent hearing loss, be careful not to raise the volume levelexcessively when using headphones.Listening over headphonesSwitching the front speakersPress to turn the corresponding speaker pairon.The front speaker A, B setting can be also be changed with.Switching the brightness of the displayPress DIMMER.The brightness of the display can be adjusted in 3 steps. Thedisplay can also be turned off.Checking the currently playing program source,etc.Press STATUS.• The current program source and various settings are indicated onthe display.Using the surround modesTypes of surround modes and their featuresThe AVR-1707 is equipped with many surround modes. Werecommend using the surround modes as described below in order toachieve the maximum effect for the specific signal source.is a 6.1-channel/7.1-channel surround mode.Sources recorded in Dolby Digital EXDOLBY DIGITAL EX / +PLIIx* ( page 22)• This mode is optimized for playing sources recorded inDolby Digital EX.Sources recorded in DTS-ESDTS-ES DSCRT 6.1 / MTRX 6.1, +PLIIx* ( page 22)• This is the optimum mode for playing sources recorded inDTS-ES.Dolby Digital or DTS Surround (5.1 ch sources)2 ch sources recorded in Dolby SurroundDOLBY DIGITAL / DOLBY DIGITAL+PLIIx* /DTS SURROUND / DTS 96/24 / DTS+PLIIx* /DTS+NEO:6 ( page 22)• This mode is optimized for playing 5.1-channel or 7.1-channel music.• For Dolby Surround recording sources, Dolby Pro Logic IIplayback is conducted.2-channel sources recorded in XM HD SurroundNEURAL SURROUND ( page 24)• This is the optimum mode for playing sources recorded inXM HD Surround. PreviousNext |