152 Set up the subwooferIf using a subwoofer capable of the followingadjustments, set up the subwoofer as shown below.n When using a subwoofer with a direct modeSet the direct mode to “On” and disable the volume adjustmentand crossover frequency setting.n When using a subwoofer without a direct modeMake the following settings:tVolume : “12 o’clock position”tCrossover frequency : “Maximum/Highest Frequency”tLow pass filter : “Off”tStandby mode : “Off”1 Set up the microphoneMount the setup microphone on a tripod or standand place it in the main listening position.When placing the setup microphone, adjust the height of thesound receptor to the level of the listener’s ear.Sound receptor SetupmicrophoneIf you do not have a tripod or stand, set up the microphone on, forexample, a seat without a back.NOTEtDo not hold the setup microphone in your hand duringmeasurements.tAvoid placing the setup microphone close to a seat back or wall assound reflections may give inaccurate results.Set up speakers (Audyssey® Auto Setup)3 Set up the remote control unitn Set up the zone modePress ZONE SELECT to switch the zone mode toJ (MAIN ZONE).The J indicator lights.Press ZONE SELECTn Set up the operation modePress AMP to set the remote control unit to AMP-operation mode.Press AMPBasic version Advanced version InformationBasic versionvSee overleaf
