Denon AVR-2112CI Owner's Manual

Also see for AVR-2112CI: Service manual Getting started Specification sheet Owner's manual Getting started

Contents

60n HDMI control function (vpage 60)n Sleep timer function (vpage 61)n Adjusting the volume of the speakers(vpage 62)n Quick select function (vpage 63)n AirPlay (vpage 64)n Party mode function (vpage 65)n Zone Management function (vpage 66)n Operating a media controller to play music and stillpictures (vpage 67)n Web control function (vpage 68)n Various memory functions (vpage 69)Playback (Basic operation) (vpage 21)Settings (vpage 14)Selecting a listening mode (Surround mode)(vpage 46)Playback (Advanced operation)Convenient functionsHDMI control functionIf you connect the unit and an HDMI control function compatible TV orplayer with an HDMI cable and then enable the HDMI control functionsetting on each device, the devices will be able to control each other.n Operations possible by HDMI controltThis unit power off can be linked to the TV power off step.tYou can switch audio output devices with a TV operation.When you set “Output audio from amp” in the TV audio outputsetup operation, you can switch the amp power on.tYou can adjust this unit volume in the TV volume adjustmentoperation.tYou can switch this unit input sources through linkage to TVinput switching.tWhen playing the player, this unit input source switches to thesource for that player.tIf you switch the input source of the unit to “TV”, you canplay TV audio with this unit (vpage 6 “About ARC (AudioReturn Channel) function”).tWhen “HDMI Control” (vpage 89) in the menu is set to“ON”, signals input to the HDMI input connector are output tothe television or other device connected to the HDMI outputconnector, even if the power of this unit is in standby (pass-through function).tTo play the audio of a TV that does not support the ARC functionwith the unit, connect the TV with an optical digital connection.tTo use the pass-through function, connect an HDMI connectiondevice that is compatible with HDMI control.n Setting procedure1 Set the HDMI output connector corresponding withthe HDMI control function.Set “HDMI Control” (vpage 89) to “ON“.2 Turn the power on for all the devices connected byHDMI cable.3 Set the HDMI control function for all devicesconnected by HDMI cable.tPlease consult the operating instructions for the connected devicesto check the settings.tCarry out steps 2 and 3 should any of the devices be unplugged.4 Switch the television input to the HDMI inputconnected to this unit.5 Switch this unit input to the HDMI input source andcheck if the picture from the player is ok.6 When you turn the TV’s power to standby, checkthat the power of this unit also goes to standby.If the HDMI control function does not operate properly, check thefollowing points.tIs the TV or player compatible with the HDMI control function?tIs “HDMI Control” (vpage 89) set to “ON”?tIs “P.Off Control” (vpage 89) set to “All” or “Video”?tAre the HDMI control function settings of all devices correct?Basic version Advanced version InformationAdvanced versionvSee overleaf