70Playback in ZONE2 (Separate room)tYou can operate this unit so as to enjoy audio in a room (ZONE2) other than the MAIN ZONE (room wherethe unit is located).tYou can simultaneously play back the same source in both the MAIN ZONE, ZONE2. You can also playback separate sources in the MAIN ZONE and ZONE2.Audio outputThere are two methods to do this, as described below. Choose one of the methods.q Zone playback by speaker outputw Zone playback by audio outputUse an external amplifier.q Zone playback by speaker outputThe ZONE2 audio signals are output from this unit’s SURR.BACK/AMP ASSIGN speaker terminals usingthe amplifier assignment function.n Connecting and setting the speakers“Amp Assign” setting (vpage 86) andaudio signals output Connecting the speakersZONE2 Output signal :Stereo (L / R)ZONE2w q w q(L) (R)w Zone playback by audio outputn Audio connections (ZONE2)The audio signals of this unit’s ZONE2 audio output terminals are output to the ZONE2 amplifiers andplayed on this amplifiers."69*/R LMAIN ZONEZONE2This unittAdjust the volume on the connected amplifier.tWe recommend using high quality pin-plug cables for audio connections in order to prevent noise.tAlso be sure to read the operating instructions of the connected devices.NOTEIt is not possible to play the digital audio signals input from the HDMI, COAXIAL or OPTICAL connectors inZONE2. Play using analog connections (in stereo).Basic version Advanced version InformationAdvanced version