Denon AVR-2112CI Owner's Manual

Also see for AVR-2112CI: Service manual Getting started Specification sheet Owner's manual Getting started

Contents

89System SetupHDMI Setup Default settings are underlined.Make settings for HDMI video/audio output.Setting items Setting detailsAuto Lip SyncMake automaticcompensation for timingshift in audio and videooutput.ON : Compensated.OFF : Not compensated.HDMI Audio OutSelect HDMI audio outputdevice.AMP : Play back through speakers connected to the unit.TV : Play back through TV connected to the unit.tThe audio signal input from the HDMI input connector can be output asan output signal from the HDMI output connector by setting the HDMIaudio output destination to TV.Audio signals input via the Analog/Coaxial/Optical input connectorscannot be output from the HDMI output connector.tWhen the HDMI control function is activated, priority is given to the TVaudio setting (vpage 60 “HDMI control function”).HDMI ControlYou can link operations withdevices connected to HDMIand compatible with HDMIControl.ON : Use HDMI control function.OFF : Do not use HDMI control function.tWhen a device that is not compatible with the HDMI control function isconnected, set “HDMI Control” to “OFF”.tPlease consult the operating instructions for each connected device tocheck the settings.tRefer to “HDMI control function” (vpage 60) for more informationabout the HDMI control function.NOTEtWhen “HDMI Control” is set to “ON”, it consumes more standbypower. If you are not using this unit for an extended period, it isrecommended that you unplug the power cord from the power outlet.t“HDMI Control” does not work when the power to the device is off.Either turn power on or set to standby.tThe HDMI control function controls operations of a TV that is compatiblewith the HDMI control function. Make sure that the TV and HDMI areconnected when you perform HDMI control.tIf the “HDMI Control” settings have been changed, always reset thepower to connected devices after the change.Setting items Setting detailsStandby SourceSets the HDMI input sourceto put into standby whenthe power is on.Last : This item is set at the last-used input source.HDMI1 / HDMI2 / HDMI3 / HDMI4 / HDMI5 / HDMI6 : Put the respectiveinput source into standby.“Standby Source” can be set when “HDMI Control” is set to “ON”.P.Off ControlLinks the power standby ofthis unit to external devices.All : If power to a connected TV is turned off independently of the inputsource, power to this unit is automatically set to standby.Video : If power to a connected TV is turned off when the input source isBD / DVD / TV / SAT/CBL / GAME1 / GAME2 / V.AUX / DOCK, power tothis unit is automatically set to standby.OFF : This unit does not link with power to a TV.“P.Off Control” can be set when “HDMI Control” is set to “ON”.Basic version Advanced version InformationAdvanced version