Denon AVR-2310CI Owner's Manual

Also see for AVR2310CI - Multi-Zone Home Theater Receiver: Specification Service manual Capabilites and Compatibilities Getting started guide Product sheet

20ENGLISH Getting Started Playback Remote Control Information Troubleshooting SpecificationsMulti-ZoneSettingsOnce Connections areCompletedTurning the Power On1 Press .The power indicator lights red and thepower is set to the standby mode.2 Press .The power indicator flashes green and thepower turns on.b Also press when in standbymode, the power turns on.When has been pressed, the input source set with theis set. If a has been pressed, the input sourcestored in the memory for the quick select function is set (vpage55 “Saving frequently used settings (Quick Select Function)”).NOTE• Power continues to be supplied to some of the circuitry even whenthe power is in the standby mode. When leaving home for longperiods of time or when traveling, either press to turn off thepower, or unplug the power cord from the power outlet.• When the ZONE2 power is switched on, and you want to switch offthe MAIN ZONE power, press .Turning the Power Off1 Press .The power is set to the standby mode.2 Press .The power indicator turns off, and so doesthe power.This operation can also be performed by pressing a onthe main unit.FrontFrontSelecting the Input SourceThere are three ways to select the input source, as described below.q Selecting the input source using the Source Select menu (GUImenu)w Selecting the input source using the SOURCE SELECT button(Main remote control unit)e Selecting the input source using the (Main unit)q Using the Source Select MenuThe input source can also be selected using the source selectionmenu.1 Set to “MAIN/TV” to “MAIN”.2 Press .Display the “Source Select” menu.qInput Source : The name of the highlighted input source isdisplayed.wRecently used sources : The currently selected input source ishighlighted.eIcons for the input sources in the different categories aredisplayed.Video : (SAT/CBL), (TV), (VCR), (DVR), (V.AUX)Player : (HDP), (DVD), (CD), (PHONO)Tuner : (TUNER), (SIRIUS)iPod : b “ ” is displayed when using a Control Dock foriPod.3 Use uio p to select the input source icon, thenpress .The input source is set and the source selection menu is turnedoff.SOURCE SELECT :SAT/CBLRecent SourceEnterSelectE N T E RSOURCE SELECT :SAT/CBLRecent SourceEnterSelectE N T E RqweUse the device selection buttons on the main remote control unit toset the device to be operated beforehand.Input sources that are not going to be used can be set ahead of time.Make this setting at “Source Delete” (vpage 33).To turn off the source selection menu without selecting an inputsource, press again.•••1 Set to “MAIN/TV” to “MAIN”.2 Press the SOURCE SELECT button (vpage 7).The desired input source can be selected directly.e Operating on the Main Unitw Operating on the Main Remote Control UnitRearFrontConnectionsTurn .b If “Tuning Preset” mode is selected forthe input source, press before turning.