ENGLISHGetting Started Connections Playback Information Troubleshooting SpecificationsMulti-ZoneSettings1 Switch .MAIN/TV : To operate the TV or iPodDEVICE : To operate a Blu-ray disc player, DVD player,Digital video recorder, video deck, satellitereceiver, cable TV or CD player2 Set to the component you want to operate.MAIN : iPodTV : TVDVD/HDP : DVD player or Blu-ray disc playerDVR/VCR : DVD recorder or video deckSAT/CBL : Satellite receiver or cable TVCD : CD player3 Operate the component.b For details, refer to the component’s operating instructions.Operating the Connected Devices by Remote Control Unit• Some manufacturers use more than one type of remote control code.Refer to the included list of preset codes to change the number andverify correct operation.• VDP (Video Disc Player) can be preset when is set to “DVD/HDP”.• The preset memory can be set for one component only among thefollowing: DVD/HDP, DVR/VCR and SAT/CABLE.1 Switch .MAIN/TV : To register a TVDEVICE : To operate a Blu-ray disc player, DVD player,Digital video recorder, video deck, satellitereceiver, cable TV or CD player2 Set to the component to be registered.TV : TVDVD/HDP : DVD player or Blu-ray disc playerDVR/VCR : Digital video recorder or video deckSAT/CBL : Satellite receiver or cable TVCD : CD player3 Press and at the sametime.The indicator starts flashing.4 Press ~ and input the 3-digit number of the brand of thecomponent to be preset. The numbersare shown in the Preset Code Table(vEnd of this manual).5 To store the codes of another component in thememory, repeat steps 1 to 4.DENON and other makes of components can be operated by settingthe preset memory.NOTEDepending on the model and year of manufacture, this function cannotbe used for some models, even if they are of makes listed in the listof preset codes.FrontDEVICE SELECT1 Play / Pause2 StopMEMORY MEMORYz1TU/PAGE Page up/down z18 9 Auto search(cue)uio p CursorENTER Enter3 PauseSEARCHPress andhold OnceBrowse/Remotemode switchingPage searchmode switchingz2RETURN Returnz1 : This operation is possible when using aDENON ASD-3N or ASD-3W Control Dockfor iPod.z2 : This operation is possible when using aDENON ASD-1R or ASD-11R Control Dockfor iPod.iPodRearFrontMain Remote Control Unit(RC-1117)Registering Preset CodesOperating Registered DevicesRemote Control