Denon AVR-2310CI Owner's Manual

Also see for AVR2310CI - Multi-Zone Home Theater Receiver: Specification Service manual Capabilites and Compatibilities Getting started guide Product sheet

33Getting Started Connections Playback Remote Control Information Troubleshooting SpecificationsENGLISHMulti-ZoneMaking detailed settings (Manual Setup)Setting items Setting contentsVolume ControlSet the MAIN ZONE volumesetting.Volume Display : Set the volume display method.Relative : The volume is displayed within the range of – – –dB (Minimum),–80.5 dB ~ +18 dB.Absolute : The volume is displayed within the range of 0, 1 ~ 99.••Vol.Limit : Make a setting for maximum volume.OFF : Do not set a maximum volume.–20dB(61) / –10dB(71) / 0dB(81)••Power On Level : This sets the volume set when the MAIN ZONE’s poweris turned on.Last : Use the memorized setting from the last session.– – – : Always use the muting on condition when power is turned on.–80dB(1) ~ +18dB(99) : The volume is adjusted to the set level.•••Mute Level : This sets the amount of attenuation of the volume when themute mode is set in the MAIN ZONE.Full : The sound is cut off entirely.–40dB : The sound is attenuated by 40 dB.–20dB : The sound is attenuated by 20 dB.•••Source DeleteRemove input sourcesthat are not used from thedisplay.TUNER / PHONO / CD / DVD / HDP / TV / SAT/CBL / VCR / DVR /V.AUX / SIRIUS: Select the sources you do not want to use.ON : Use this source.Delete : Do not use this source.NOTE• The currently selected input source cannot be set.• Input sources set to “Delete” cannot be selected using .••GUIMake the settings related todisplays on the TV screen.Screensaver : Make screensaver settings.ON : The screen switches to the screensaver if no operation is performedfor approximately 3 minutes while a menu is displayed or while an iPodscreen is displayed. When you press uio p, the screen saver iscancelled and the screen before that screen saver started is displayed.OFF : Turn the screensaver function off.••Wall Paper : Set wallpaper to display the background when playback isstopped, etc.Picture : Set the background to a picture (DENON logo).Black : Set the background to black.••Making other settings (Option Setup)Default settings are underlined.Setting items Setting contentsLevel LchAdjust the left channel outputlevel.–12dB ~ +12dB (0dB)Level RchAdjust the right channeloutput level.–12dB ~ +12dB (0dB)Volume DisplaySet the ZONE2 volumedisplay method.Relative : The volume is displayed within the range of – – –dB (Minimum),–80 dB ~ +18 dB.Absolute : The volume is displayed within the range of 0, 1 ~ 99.Vol.LimitMake a setting for maximumvolume.OFF : Do not set a maximum volume.–20dB(61) / –10dB(71) / 0dB(81)Power On LevelDefi ne the volume settingthat is active when the poweris turned on.Last : Use the memorized setting from the last session.– – – : Always use the muting on condition when power is turned on.–80dB(1) ~ +18dB(99) : The volume is adjusted to the set level.Mute LevelSet the amount of attenuationwhen muting is on.Full : The sound is cut off entirely.–40dB : The sound is attenuated by 40 dB.–20dB : The sound is attenuated by 20 dB.• The volume is displayed using the display method set at “Volume Display” (vpage 33).• Set the main volume at “Volume Control” (vpage 33).Make settings for audio playback in a ZONE2 system.“ZONE2 Setup” is displayed when ZONE2 is selected with “Amp Assign” (vpage 28).Making the ZONE2 settings (ZONE2 Setup)Default settings are underlined.See overleaf: Moves the cursor (Up/Down/Left/Right) : Decision the setting : Return to previous menuRemote controloperation buttons : Displaying the menuCancel the menuSettings