Denon AVR-3806 Operating Instructions Manual

Also see for AVR-3806: Operating instructions Capabilities and Compatibilities Guide Specifications Supplementary guide Code List

Contents

77Advanced Setup – Part 2 Advanced Setup – Part 2• If “LFE+Main” is set at “Subwoofer Setup”, “SW:LFE+Main”( page 74) is displayed at the top right of the screen.• We recommend using with the crossover frequency set to “80Hz”, but depending on the speaker, setting it to a differentfrequency may improve frequency response near the crossoverfrequency.• The crossover frequency mode is valid only when subwoofer isset to ON, and when one or more speakers are set to SMALL,as described in section “Speaker Configuration” settings (page 73).• If “LFE” is selected at “Subwoofer Setup”, the frequenciescan only be selected for speakers set to “Small” at “SpeakerConfiguration”.• If “LFE+Main” is set at “Subwoofer Setup”, the frequenciescan be selected regardless of the speaker size setting.• For the “WIDE SCREEN” and “7CH STEREO” DSP simulationmodes, the surround speakers can be set separately.Setting the crossover frequency individuallyfor the different channels1 Press the CURSOR FF or GG button to select“Advanced” at “Crossover Frequency” screen.2 Press the CURSOR DD or HH button to select thespeaker to be set.3 Press the CURSOR FF or GG button to select thefrequency.Selecting the Surround Speakers for thedifferent surround modes• This menu is displayed when both surround speakers A and Bare used.• At this screen preset the surround speakers to be used in eachsurround modes.1 Press the CURSOR DD or HH button to select“Surround Sp Setup” at “Speaker Setup” menu,then press the ENTER button.• The “Surround Sp Setup” screen appears.2 Press the CURSOR DD or HH button to select thesurround mode, then press the CURSOR FF or GGbutton to select the surround speaker.A:When surround speakers A is used.B:When surround speakers B is used.A + B:When both surround speakers A and B are used.3 Press the ENTER button to enter the setting.• The “Speaker Setup” menu reappears.4 Press the ENTER button to enter the setting.• The “Speaker Setup” menu reappears.4 Press the CURSOR DD or HH button to select“Exit”, then press the ENTER button.• The “System Setup Menu” reappears.2 About Speaker type setting when using bothsurround speakers A and BIf “Small” is set for either surround speakers A or B, the outputis the same as when “Small” is set for both A and B.ENGLISHENGLISH