Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting SpecificationsGFlow of video signals for ZONE2H• This function automatically converts various formats of video signals input to the AVR-4308CI into theformat used to output the video signals from the AVR-4308CI to a monitor.• The AVR-4308CI’s video input/output circuitry is compatible with the following four types of videosignals:Digital video signals: HDMIAnalog video signals: Component video, S-Video and VideoVideo Conversion FunctionGFlow of video signals inside the AVR-4308CIHMain zoneHigh picturequality playback HDMI connectorComponent videoconnectorsS-Video connectorVideo connectorMonitorHDMI connectorComponent videoconnectorsS-Video connectorVideo connectorVideo inputs Video outputs: When 480i/576i signals are input in the main zoneComponent videoconnectorsS-Video connectorVideo connectorComponent videoconnectorsVideo connectorVideo inputs Video outputsZONE2NOTE• HDMI signals cannot be converted into analog signals.• 1080p component input video signals cannot be output to anything other than component videoconnectors.• 480p/576p, 1080i and 720p component video input signals cannot be converted into S-Video or Videoformat.• When using the component video output connectors for connection to the ZONE2 monitor, the ZONE2’son-screen display is not displayed.• When a non-standard video signal from a game machine or some other source is input, the videoconversion function might not operate.• When not using this function, connect a monitor output with the same type of connector as the videoinput connector.• The resolution of the HDMI input-compatible monitor connected to the AVR-4308CI can be checked atGUI menu “Information” – “HDMI Information” – “Monitor1” or “Monitor2” (vpage 48).High picturequality playbackZONE2monitorConnections