Denon AVR 4308CI - AV Network Receiver Owner's Manual

Also see for AVR 4308CI - AV Network Receiver: User manual Specifications Specification Owner's manual Manual

Contents

Denon AVR 4308CI - AV Network Receiver Owner's Manual Manual pdf 67 page image

Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting SpecificationsRemote Control Unit OperationsMain Remote Control Unit• On the main remote control unit, the display switchesaccording to the device being operated and the mode.• In modes other than iPod, the mode switchesbetween“DEVICE1” and “DEVICE2” each time the [MODESELECTOR] is pressed.• In the AMP, TUNER, NET/DTU and iPod modes, whenthe remote ID is set, the AVR-4308CI can be usedindependently even in an environment containing multipleDENON amplifiers.Depending on the model and year of manufacture of your equipment,some buttons may not operate.NOTEThe device mode (“DEVICE1” or “DEVICE2”) cannot be changedwhile the setting is being made.Operating DENON Audio Components1 Press [MODE SELECTOR] for the component to beoperated.The indicator for the component to be operated flashes.: AMP / ZONE2 / ZONE3 / ZONE4/ SYSTEM CALL: TUNER (FM/AM) / XM: NETWORK/USB /DIGITAL TUNER (HD Radio): Satellite Receiver / Cable TV: iPod: DVD player (Recorder) /CD player (Recorder): VCR / TAPE: TVb The mode switches each time [AMP] is pressed.GAMP modeH GZONE2 modeH GZONE3 modeHGSYSTEM CALL modeH GZONE4 modeH2 Operate the component.b For details, refer to the component’s operating instructions.[HOME] is used to return to the AMP mode (AMP, ZONE2, ZONE3,ZONE4 or SYSTEM CALL) when in any mode other than AMP.PresettingThe included main remote control unit can be preset tooperate devices of various brands.1 Press [MODE SELECTOR] for the device you want topreset.2 Press and hold in [RC SETUP] for at least 3 seconds.The signal transmission indicator flashes twice.3 Press [NUMBER] and input the 5-digit number of thebrand of the component to be preset. The numbersare shown in the Preset Code Table (v End of thethis manual).When the code is registered, the signal transmission indicatorflashes twice.When the preset code is transmitted, the mode indicator for thecomponent to which that code belongs flashes.b The input mode is canceled if no button is operated for 10seconds.Some brands have more than one preset code. If the component doesnot operate, try inputting a different code.Operating Preset Components1 Press [MODE SELECTOR] for the component to beoperated.The mode indicator of the device to be operated flashes.2 Operate the component.b For details, refer to the component’s operating instructions.[NUMBER][MODE SELECTOR][RC SETUP][HOME][ AMP]Signal transmissionindicatorRemote Control