Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting SpecificationsCarefully check the left (L) and right (R) channels and the inputs and outputs, and be sure to interconnectcorrectly.Connecting the Recording ComponentsDigital Video RecorderConnect the cables to be used.47*%&0*/3- 3-*/*/065"6%*07*%&0*/065015*$"-065"6%*07*%&0065RLRLRLRLDigital video recorderNOTEDo not connect the output of the component connected to the AVR-4308CI’s OPTICAL2 output connectorto any input connector other than OPTICAL2.• Make analog connections if you wish to record analog audio signals.• When recording to a digital video recorder, it is necessary that the type of cable used with the playbacksource equipment be the same type that is connected to the AVR-4308CI DVR OUT connector.Example: TV IN → S-Video cable : DVR OUT → S-Video cableTV IN → Video cable : DVR OUT → Video cable• When using a component video cable for the video connection, make the settings at GUI menu “SourceSelect” – “DVR” – “Assign” – “Component” (vpage 42).or orConnections47*%&0*/3- 3-*/*/065"6%*07*%&0065"6%*07*%&0065 */065015*$"-RLRLRLRLVideo Cassette RecorderConnect the cables to be used.Video cassette recorder• When recording to a VCR, it is necessary that the type of cable used with the playback source equipmentbe the same type that is connected to the AVR-4308CI VCR OUT connector.Example: TV IN → S-Video cable : VCR OUT → S-Video cableTV IN → Video cable : VCR OUT → Video cable• When using a component video cable for the video connection, make the settings at GUI menu “SourceSelect” – “VCR” – “Assign” – “Component” (vpage 42).orNOTEDo not connect the output of the component connected to the AVR-4308CI’s OPTICAL3 output connectorto any input connector other than OPTICAL3.or