Denon AVR 4308CI - AV Network Receiver Owner's Manual

Also see for AVR 4308CI - AV Network Receiver: User manual Specifications Specification Owner's manual Manual

Contents

Denon AVR 4308CI - AV Network Receiver Owner's Manual Manual pdf 56 page image

Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting SpecificationsPlaybackCheck the HD Radio ReceptionInformationPress while an HD Radio broadcast is beingreceived.The current reception information is shown on the display.q Normal↓w Frequency / Signal strength↓e Long station name / Program and Program type↓r Title name / Artist name↓t Album name / Genre nameNOTEIf the station signal weakens while receiving a digital broadcast (while“ ” and text is displayed), the mode automatically switches to theanalog reception mode (the reception frequency is displayed).Because of this, the “ ” indicator and text may flicker if the stationsignal level is weak and unstable.n Default settingsTuner presetsA1 ~ A8 87.5 / 87.9 / 89.1 / 93.3 / 97.9 / 98.1 / 98.9 /100.1 MHzB1 ~ B8 101.9 / 102.7 / 107.9 / 90.1 / 90.1 / 90.1 / 90.1 / 90.1MHzC1 ~ C8 530 / 600 / 930 / 1000 / 1120 / 1210 / 1400 / 1710 kHzD1 ~ D8 90.1 MHzE1 ~ E8 90.1 MHzF1 ~ F8 90.1 MHzG1 ~ G8 90.1 MHzSelecting Audio ProgramsHD Radio includes up to 9 audio programs (HD1 to HD8and Analog). The different audio programs also have dataprograms.Press [SEARCH] or ui to select the audio program.If the station you are listening to has multiple audio programs, “HD1”is indicated on the display. If it only has one audio program, “HD” isindicated.If an audio program from HD2 to HD8 has been interrupted or if a programis called out using the preset buttons after it has been interrupted, HD1 isautomatically selected after about 20 seconds.About the button names in these explanations< > : Buttons on the main unit[ ] : Buttons on the remote control unitButton name only:Buttons on the main unit and remote control unit ENTER uiop[REPEAT][8][2][RAMDOM][9][1/3](Main remote control unit)(Sub remote control unit)uiop[SEARCH][NET/DTU](DEVICE2 mode)uiop[SEARCH][POWER OFF][ iPod][iPod](AMP mode)[CHANNEL +/– ]ENTER[8],[9],[6],[7],[1],[2]iPod® PlaybackThe music on an iPod can be played by using the ControlDock for iPod (ASD-1R, sold separately).The operation can also be performed using the buttons onthe main unit or remote control unit while watching the GUImenus.iPod is a trademark of Apple Inc., registered in the U.S.and other countries.b The iPod may only be used to copy or play contents that are notcopyrighted or contents for which copying or playback is legallypermitted for your private use as an individual. Be sure to complywith applicable copyright legislation.1 Make the necessary preparations.q Set the iPod in the DENON Control Dock for iPod.(vSee the Control Dock for iPod’s operating instructions.)w Assign the Control Dock for iPod’s input.: ”Source Select” – “(input source)” – “Assign”–”iPod dock” (vpage 42)2 Either turn or press [iPod] (AMPmode) to select the input source assigned in step 1-wabove.(iPod screen)b If the screens above are not displayed, the iPod may not beproperly connected. Try connecting again.: ”Source Select” – “(input source)” – “Play”(vpage 40)3 To operate using the main remote control unit, set theremote control unit to the iPod mode.(vpage 64 “Remote Control Unit Operations”)OK to disconnectBasic Operation