Denon AVR 4308CI - AV Network Receiver Owner's Manual

Also see for AVR 4308CI - AV Network Receiver: User manual Specifications Specification Owner's manual Manual

Contents

Denon AVR 4308CI - AV Network Receiver Owner's Manual Manual pdf 79 page image

Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting SpecificationsMulti-Zone OperationsTurning the Power On and OffGOperation on the main unitHPress , or for the zoneto be operated.When the power turns on, the multi-zone indicator lights on thedisplay.GOperation on the remote control unitHIn the zone mode you want to operate, press [ON] or [OFF].Selecting the Input SourceGOperation on the main unitHq Press and select the zone to be adjusted.w Turn .GOperation on the remote control unitHIn the zone mode you want to operate, press [SOURCE SELECT].Adjusting the VolumeGOperation on the main unitHq Press and select the zone to be adjusted.w Turn to adjust.GOperation on the remote control unitHIn the zone mode whose volume you want to adjust, press [VOLUME].– – – –70dB ~ –40dB ~ 18dB[Variable range]• The volume can be adjusted when GUI menu “Manual Setup”– “Zone Setup” – “(select the zone)” – “Volume Level” is set to“Variable”. The volume can be increased up to the value set atGUI menu “Manual Setup” – “Zone Setup” – “(select the zone)”– “Volume Limit” (vpage 36).• The volume for ZONE2 and ZONE3 can be adjusted with the remotecontrol unit.SOURCE SELECT VOLUME[Z2 ON][OFF][MUTE][VOLUME][ AMP]SOURCESELECTAbout the button names in these explanations< > : Buttons on the main unit[ ] : Buttons on the remote control unitButton name only:Buttons on the main unit and remote control unitZONE2 MENUINPUT :DVDSIGNAL:ANALOGVOL. :-40dB>Bass 0dBHPF OFFTreble 0dBLch Lev. 0dBRch Lev. 0dBZONE2 MENU>Channel STEREOVol.Lev. VARP.On Lev. LASTVol.Limit OFFMute Lev. FULLTurning off the Sound TemporarilyIn the zone mode for which you want to mute the sound, press[MUTE].The sound is reduced to the level set at GUI menu “Manual Setup”– “Zone Setup” – “(select the zone)” – “Mute Level” (vpage 36).To cancel, either adjust the volume or press [MUTE] again.The setting is canceled when the zone’s power is turned off.• The source selected for ZONE2 is also output from the recordingoutput connectors.• For ZONE2, the “Zone Setup” can be made while watching the on-screen display. Also, when ZONE3 is operated, the on-screen displayappears on the ZONE2 monitor, so operation can be performedwatching this on-screen display.NOTE• When connected to the component video output connectors, theon-screen display is not displayed.• When the input source to which the digital input connectors(OPTICAL/COAXIAL) are assigned is selected in ZONE2 or ZONE3,playback is only possible if the digital signal being input is in PCM(2-channel) format.• Digital audio signals input from the DENON LINK or HDMI connectorscannot be played in multi-zone.• In ZONE4, it is not possible to select “XM”, “HD Radio”, or sourceswith no digital input signals (“TUNER”, “PHONO”, “iPod”, etc.).Network audio signals (Internet radio, music server, USB) can beplayed as long as they are not copyright-protected.• When certain digital signals are being input, noise may be outputfrom the ZONE2 and ZONE3 audio output connectors.• When “DENON LINK” is assigned at the GUI menu “Assign” setting,the PCM signals, network audio signals (Internet radio, music serverand USB), XM signals and HD Radio signals input from the digitalinput connectors cannot be output from the ZONE2 and ZONE3audio output connectors.(ZONE3 orZONE4 mode)[OFF][ON][ZONE SELECT][OFF][MUTE]Multi-zoneindicator[ON]VOLUMESOURCE SELECT(Main remote control unit)(Sub remote control unit)Multi-Zone