Getting Started Connections Setup Playback Remote Control Multi-Zone Information Troubleshooting SpecificationsXMNOTEKeep the power cord unplugged until the XM Mini-Tuner and HomeDock connection have been completed.XM Connector• The AVR-4308CI is an XM Ready ® receiver. You can receive XM ®Satellite Radio by connecting to the XM Mini-Tuner and Home Dock(includes home antenna, each sold separately) and subscribing to theXM service.• Plug the XM Mini-Tuner and Home Dock into the XM connector onthe rear panel.• Position the Home Dock antenna near a south-facing window toreceive the best signal.For details, see “Listening to XM Satellite Radio Programs” (vpage51, 52).When making connections, also refer to the operating instructions ofthe XM Mini-Tuner and Home Dock.XM Mini-Tuner and Home Dock• The XM name and related logo are registered trademarks of XMSatellite Radio Inc. All rights reserved.• XM Ready is a registered trademark of XM Satellite Radio Inc. Allrights reserved.ConnectionsUSB Port• In the initial status, USB memory devices can be used by connecting them to the USB port on the front panel.• To change the port to be used, see “USB Select” on page 42.• For instructions on playing the files on a USB memory device, see page 58, 59.NOTE• Set to the USB port you want to use.• The AVR-4308CI is equipped with two USB ports, one each on the front and rear panels. It is not possible to use the set with USB memorydevices connected to both the ports at the same time. Select the USB port you want to use at the “Source Select” – “NET/USB” – “PlaybackMode” – “USB Select” menu.• Do not use the extension cable for connecting the USB memory deveice to the AVR-4308CI’s USB port.Use of the extension cable may cause harmful interference.n Front panel n Rear panelUSB memory device USB memory device