Denon AVR-786 Operating Instructions Manual

Also see for AVR-786: Service manual Operating instructions Brochure & specs

Contents

Basic OperationFUNCTION BAND0N/STANDBY SHIFTPRESETTUNINGTUN,NGTUNER_PRESETMODE_ _'=__SHIFTMEMORY_ _BANDONSCBEEN• DEFAULT SETTINGS• This unit is equipped with a function for automatically searchingfor FM breadcast stations and storing them in the presetmemory.• The "Auto tuner preset" operation can also be performed at"System setup" (_ page 41).switch on the main unit.; , D1 ~ D8 90.1 MHz,,The unit automatically begins searching for FM broadcastStations.÷When the first FM broadcast station is found, that station isstored in £he preset memory at channel A1Subsequent stations are automatical!y stored in order atpreset channels A1 to AS, B1 tO B8, C1 to C8, D1 tO D8, E1to E8, F1 to F8 and G1 to G8 fol a maximum of 56 stations.÷ Channel A1 is tuned in aft:el the auto preset memoryoperation is complete &E1 ~ E8 90 1MHzF1 ~ F8 90.1MHzG1 ~ G8 90.1MHzBasic Operation[ Auto tuninq ]1 Set the input source to "TUNER".FUNCf ok TUNE_(Main unit ::{emotecontrol unibWatching the displa); press the BAND button toselect the desired band (AM or FM).Press the MODE button to set the auto tuning0 mode.MODE _ ManuaPress the TUNING (+) or (-) button.÷ Ant )ma]:lC searching Deg ns. men stoos wRen I STaTler][uRea IF• When In me auto tunmg moae n me FM r)anc the "STEREO"nalca_or iig IS en me alSDIa wRen a szereo r_reaacas_ s tuneaAt _Den freauen@e. < rne nelse s mu_ea aria me TUNED"and "STEREO" indicaters turn off.• If an FM station cannot be preset automatically due to peerreception, use the "Manual tuning" operatien to tune in thestation, then preset it using the manual "Preset memery"operation.• To interrupt this function, press the 0N/STANDBY switch.29I Er,IGLISH I