0Getting Started Connections Playback Remote Control Information Troubleshooting SpecificationsENGLISH Multi-ZoneSetting items Setting contentsRGB RangeSet the video range of RGBoutput from the HDMIterminal.Normal : Output with RGB video range (16 (black) to 235 (white)).Enhanced : Output with RGB video range (0 (black) to 255 (white)).This setting is valid when using a TV equipped with a DVI terminal.Auto Lip SyncAutomatic compensationfor timing shift in audio andvideo output.ON : Compensated.OFF : Not compensated.HDMI Audio OutSelect HDMI audio outputdevice.Amp : Use speakers connected to AVR-890 for audio playback.TV : Use speakers of TV for audio playback.NOTEWhen the HDMI control function is operating, the setting of audio playbackin the connected TV takes priority (vpage 52 “Controlling HDMI-compatible devices from the AVR-890 (HDMI Control Function)”).HDMI ControlExternal devices can becontrolled from the AVR-890 and the AVR-890 canbe controlled from externaldevices.NOTEThe HDMI controlfunction controlsoperations of a TV thatis compatible with theHDMI control function.Make sure that the TVand HDMI are connectedwhen you perform HDMIcontrol.ON : Use the HDMI control function.OFF : Do not use the HDMI control function.• Please consult the operating instructions for each connected deviceto check the settings.• For details on the HDMI control function, see “Controlling HDMI-compatible devices from the AVR-890 (HDMI Control Function)”(vpage 52).NOTE• When “Control” is set to “ON”, it consumes more standby power.• When not using this unit for a long period, we recommend that you pressto turn off (jOFF) the power.• When the “HDMI Control” setting has been changed, always turn off thepower to the connecting devices afterwards and then turn back on.• The “HDMI Control” does not work when the power to the equipment isoff.• When “HDMI Control” is set to “ON”, power is supplied constantly to theAC outlet (UNSWITCHED).Make settings for HDMI video/audio output.Making the HDMI settings (HDMI Setup)Default settings are underlined.Setting items Setting contentsStandby SourceSet the HDMI connector forHDMI signal input duringstandby.This can be set when“HDMI Control” is setto “ON”.Last : Standby with last used input source during power on.HDMI1 / HDMI2 / HDMI3 / HDMI4 / HDMI5 : The standby mode is set atthe input source assigned to the respective.Power Off ControlThe power of the AVR-890and external device turn offtogether.This can be set when“HDMI Control” is setto “ON”.ON : Switched.OFF : Not switched.• Please consult the operating instructions for each connected deviceto check the settings.• For details on the HDMI control function, see “Controlling HDMI-compatible devices from the AVR-890 (HDMI Control Function)”(vpage 52).Making detailed settings (Manual Setup): Moves the cursor (Up/Down/Left/Right) : Decision the setting : Return to previous menuRemote controloperation buttons : Displaying the menuCancel the menuSetting items Setting contentsEXT.IN SW LevelSet the playback level of theanalog subwoofer signalsinput from the external inputterminals (EXT. IN).+15dB : This is the recommended level.+10dB / +5dB / 0dB : Select the level according to the player being used.Make settings for audio playback.Making the audio settings (Audio Setup)Default settings are underlined.SettingsSee overleaf