Getting Started Connections Playback Remote Control Information Troubleshooting SpecificationsENGLISHMulti-ZoneSetting items Setting contentsInput Assign (HDMI)Assign input sources to inputconnectors.HDMI : The DVD HDP TV SAT/CBL VCR DVR V.AUX inputsources are assigned to the HDMI input terminals as shown below.HDMI1 / HDMI2 / HDMI3 / HDMI4 / HDMI5None : Do not assign an HDMI input terminal to the currently selectedinput source.b Upon purchase, the settings of the different input sources are as shownbelow.Inputsource DVD HDP TV SAT/CBL VCR DVR V.AUXDefaultsetting HDMI1 HDMI2 None HDMI3 None HDMI4 HDMI5• When HDMI is assigned to an input source, the audio signal switchesto HDMI along with the video signal. To use with the digital audioinput connectors assigned, set menu “Input Mode” (vpage 37) to“Digital”.• When the AVR-890 and TV are connected with an HDMI cable, if theTV is not compatible with HDMI audio signal playback, only the videosignals are output to the monitor.• The audio signals input from the analog, digital and EXT. IN connectorsare not output to the TV.NOTEWhen “HDMI Control” is set to “ON”, HDMI cannot be assigned to “TV”at the “HDMI” settings (vpage 30).••Input Assign (Digital)Assign input sources to inputconnectors.Digital : The DVD HDP TV SAT/CBL VCR DVR V.AUX CDSIRIUS input sources are assigned to the digital audio input terminals asshown below.Coax1 / Coax2 / Opt1 / Opt2 / Opt3None : Do not assign a digital input terminal to the currently selectedinput source.b Upon purchase, the settings of the different input sources are as shownbelow.Input source DVD HDP TV SAT/CBL VCRDefault setting Coax1 None Opt1 Coax2 NoneInput source DVR V.AUX CD SIRIUSDefault setting Opt2 Opt3 None None••Making the input settings (Input Setup)Setting items Setting contentsInput Assign (Component)Assign input sources to inputconnectors.Component : The DVD HDP TV SAT/CBL VCR DVR V.AUXinput sources are assigned to the component video input terminals asshown below.1-RCA (Component video 1 input terminal) / 2-RCA (Component video2 input terminal)None : Do not assign the component video input terminals to the currentlyselected input source.b Upon purchase, the settings of the different input sources are as shownbelow.Inputsource DVD HDP TV SAT/CBL VCR DVR V.AUXDefaultsetting 1-RCA None None None None 2-RCA None••iPod DockChange the input source towhich the control dock foriPod is assigned.The control dock for iPod can be assigned to the DVD SAT/CBL VCRDVR V.AUX CD input sources.Assign : Assign the currently selected input source to the Control Dock foriPod input.None : Do not assign the currently selected input source to the Control Dockfor iPod input.• With the default settings, the control dock for iPod can be usedconnected to the VCR (iPod) connector.• Even if “iPod Dock” is set to “Input Assign”, if AVR-890 and controldock for iPod are not connected, the input is used as the normal inputsource.Changing the Input Sources Assigned to theInput Terminals (Input Assign)Default settings are underlined.: Moves the cursor (Up/Down/Left/Right) : Decision the setting : Return to previous menuRemote controloperation buttons : Displaying the menuCancel the menuSettings