Denon AVR-890 Owner's Manual

Also see for AVR-890: Specifications Specification Service manual Comparison chart Getting started guide

Getting Started Connections Playback Remote Control Information Troubleshooting SpecificationsENGLISH Multi-ZoneSetting items Setting contentsVideo SelectSwitch video input sourcewhile listening to audiosignal.Source : Play the picture and sound of the input source.DVD / HDP / TV / SAT/CBL / VCR / DVR / V.AUX : Select video inputsource to view. This can be set for individual input sources.NOTEIt is not possible to select HDMI input signals.When playing HDMI video input signals, the analog video signal ofanother input source cannot be selected for the HDMI video output.Input sources for which “Delete” is selected at “Source Delete” (vpage32) cannot be selected.Input sources for which “None” is selected at “Input Assign” (vpage35) cannot be selected.• This can also be set by pressing .• To cancel, press to select “Source”.••••Video ConvertThe input video signal isconverted automatically infunction of the connectedTV (vpage 9 “ConvertingInput Video Signals forOutput (Video ConversionFunction)”).This can be set when the input source is DVD HDP TV SAT/CBLVCR DVR V.AUX .ON : The input video signal is converted.OFF : The input video signal is not converted.When a non-standard video signal from a game machine or some othersource is input, the video conversion function might not operate. In thiscase set “Video Convert” to “OFF”.When “Video Convert” is set to “OFF”, the video conversion functiondoes not work. In this case, connect the AVR-890 and TV with the sametype of cable.••i/p ScalerThe input source’s resolutionis converted to the resolutionset at “Resolution”.This can be set to the DVD HDP TV SAT/CBL VCR DVR V.AUXinput sources.OFF : Do not use i/p scaler function.Analog : Analog signals are converted to HDMI signals.Analog and HDMI : Both analog signals and HDMI signals are convertedto the desired HDMI resolution.ResolutionSet the output resolution.Resolution A (Analog) : AnalogVideoResolution H (HDMI) : HDMIThis can be set when the input source is set to DVD HDP TVSAT/CBL VCR DVR V.AUX , and when “i/p Scaler” is set to anythingother than “OFF”.AUTO : Detect monitor panel resolution and automatically set outputresolution.480p/576p / 1080i / 720p / 1080p / 1080p:24Hz : Select the outputresolution.Making the video settings (Video)Default settings are underlined.Making the input settings (Input Setup)The items that can be set depend on the input source and the “Input Assign” setting.: Moves the cursor (Up/Down/Left/Right) : Decision the setting : Return to previous menuRemote controloperation buttons : Displaying the menuCancel the menuSettingsSetting items Setting contentsProgressive ModeSelect optimum progressivemode for video material.This can be set when the input source is set to DVD HDP TVSAT/CBL VCR DVR V.AUX , and when “i/p Scaler” is set to anythingother than “OFF”.AUTO : The video material is automatically detected and the appropriatemode is set.Video1 : Select mode suitable for video playback.Video2 : Select mode suitable for video and 30-frame film materialplayback.AspectSet the aspect ratio of thevideo signal output from theHDMI terminal.This can be set when the input source is set to DVD HDP TVSAT/CBL VCR DVR V.AUX , and when “i/p Scaler” is set to anythingother than “OFF”.Normal : Output at 4:3 aspect ratio.Full : Output at 16:9 aspect ratio.