Denon AVR-890 Owner's Manual

Also see for AVR-890: Specifications Specification Service manual Comparison chart Getting started guide

Getting Started Connections Remote Control Information Troubleshooting SpecificationsENGLISHMulti-ZoneSettingsSetting items Setting contentsStatusShows information aboutcurrent settings.Select Source / Name / Surround Mode / Input Mode / Decode Mode /HDMI / Digital / Component / iPod Dock /Video Select /Video Convert /i/p Scaler / Resolution / Progressive Mode / AspectYou can also display current status on the main unit’s display each time youpress on the main unit.ZONE2POWER/ Select Source/ Master Volume•Audio Input SignalShows information aboutaudio input signals.Surround Mode : The currently set surround mode is displayed.Signal : The input signal type is displayed.fs : The input signal’s sampling frequency is displayed.Format : The number of channels in the input signal (front, surround, LFE)is displayed.Offset : The dialogue normalization correction value is displayed.Flag : This is displayed when inputting signals including a surround backchannel. “MATRIX” is displayed with Dolby Digital EX and DTS-ES Matrixsignals, “DISCRETE” with DTS-ES Discrete signals.HDMI InformationShows information aboutHDMI input signals andmonitor.HDMI Signal InformationResolution / Color Space / Pixel Depth•HDMI Monitor InformationInterface / Suport Resolution•Auto Surround ModeShows information aboutauto surround modesettings.Analog/PCM / Digital 2ch / Digital 5.1ch / Multi CHQuick SelectShows information aboutquick select settings.Quick Select 1 / Quick Select 2 / Quick Select 3Select Source / Video Select / MultEQ / Dynamic EQ / Dynamic Vol /Analog/PCM / Digital 2ch / Digital 5.1ch / Multi CH•ZONE2 Quick SelectZ2 Quick Select 1 : Select Source / Volume LevelZ2 Quick Select 2 : Select Source / Volume LevelZ3 Quick Select 3 : Select Source / Volume LevelPreset ChannelShows information aboutpreset channels.A 1 ~ G 8TUNER / SIRIUS•: Moves the cursor (Up/Down/Left/Right) : Decision the setting : Return to previous menuRemote controloperation buttons : Displaying the menuCancel the menuPlaybackChecking the Status(Information)Setting items Setting contentsContrastAdjust picture contrast.–6 ~ +6 (0)BrightnessAdjust picture brightness.0 ~ +12Chroma LevelAdjust picture chroma level(saturation).–6 ~ +6 (0)HueAdjust color hue.–6 ~ +6 (0)DNRReduce overall picture noise.OFF / Low / Middle / HighEnhancerEmphasize picture contours.0 ~ +12“DNR” and “Enhancer” are each effective with HDMI output.The value set at “Picture Adjust” is stored in the memory individually for each input source.••This can be set when the input source is DVD HDP TV SAT/CBL VCR DVR V.AUX .With input sources other than the ones above, this can be set when “Video Select” is selected. In thiscase, the original input source settings are called out.Can be set when the “Video Convert” setting (vpage 36) is “ON”.•b•Adjusting the Picture Quality (Picture Adjust)Default settings are underlined.