106AppendixTipsSettingsConnectionsContentsFront panel Display Rear panel IndexRemotePlaybackQuick select functionYou can save settings such as the input source selection, volume level, and sound mode at the QUICK SELECT 1 – 4 buttons.You can simply press one of the set QUICK SELECT buttons for subsequent playback to switch to various saved settings all at once.By saving frequently used settings at the QUICK SELECT 1 – 4 buttons, you will always be able to easily call up the same playback environment.Calling up the Quick Select1 Press QUICK SELECT.The Quick Select settings for the button you pressed are called up.• The default settings of each Quick Select function are as shown below.Button Input source Volume Sound modeQUICK SELECT 1 CBL/SAT 40 STEREOQUICK SELECT 2 Blu-ray 40 STEREOQUICK SELECT 3 GAME 40 STEREOQUICK SELECT 4 NETWORK 40 STEREOChanging the settings1 Set the items below to the settings you want to save.q Input sourcez (vpage 41)w Volume (vpage 42)e Sound mode (vpage 95)r Audyssey (Audyssey MultEQ® XT, Audyssey Dynamic EQ®,Audyssey Dynamic Volume®) (vpage 126)2 Press and hold the desired QUICK SELECT until “QuickzMemory” appears on the display.The current settings will be memorized.z The number for the QUICK SELECT button you pressed is displayed.2 Changing the Quick Select NameOn this unit, you can change the Quick Select Name displayed on themenu to the name that you prefer.For the name change method, see “Quick Sel.Names” (vpage 154).
