110AppendixTipsSettingsConnectionsContentsFront panel Display Rear panel IndexRemotePlaybackPlayback in ZONE2ZONE2 X POWER XZONE2MUTE ZONE2SOURCEZONE2VOLUME1 Press ZONE2 X to turn on the ZONE2 power.The ( indicator on the display lights.%• When ZONE2 X is pressed, ZONE2 turns off.• Power in ZONE2 can be turned on or off by pressing ZONE2 ON/OFF on the main unit.2 Press the ZONE2 SOURCE df button to select the inputsource to be played.The audio signal of the selected source is output to ZONE2.%• In ZONE2, you can select iPod/USB, TUNER, NETWORK or aninput source with an analog audio input connector.• To perform an operation with the main unit, press ZONE2SOURCE.Each time you press ZONE2 SOURCE, the input source changes.2 Adjusting the volumeUse ZONE2 VOLUME df to adjust the volume.• At time of purchase, “Volume Limit” (vpage 153) is set to “70(–10dB)”.%• Turn MASTER VOLUME after pressing ZONE2 SOURCE on the main unit toadjust the sound volume.
