138AppendixTipsPlaybackConnectionsContentsFront panel Display Rear panel IndexRemoteSettingsProcedure for speaker settings(Audyssey® Setup)PreparationMeasurementCalculationCheckStoreFinish1 Mount the Setup and measurement microphone on atripod or stand and place it in the main listening position.When you set the setup microphone, point the tip of it toward theceiling, at the height of your ears in your listening position.2 If using a subwoofer capable of the followingadjustments, set up the subwoofer as shown below.n When using a subwoofer with a direct modeSet the direct mode to “On” and disable the volume adjustmentand crossover frequency setting.n When using a subwoofer without a direct modeMake the following settings:• Volume : “12 o’clock position”• Crossover frequency : “Maximum/Highest Frequency”• Low pass filter : “Off”• Standby mode : “Off”
