125AppendixTipsPlaybackConnectionsContentsFront panel Display Rear panel IndexRemoteSettingsAudio DelayWhile viewing video, manually adjust the time to delay audio output sothat the video and audio are synchronized.0ms (Default) – 200ms%• This item can be set within the range of 0 to 100 ms when “Auto Lip Sync”(vpage 129) is set to “On” and when a TV compatible with Auto Lip Sync isconnected.• Store “Audio Delay” for each input source.VolumeSet the MAIN ZONE (room where the unit is located) volume setting.2 ScaleSet how volume is displayed.0 – 98 (Default) : Display in the range 0 (Min) to 98.–79.5dB – 18.0dB : Display ---dB (Min), in the range –79.5 dB to 18.0dB.%• The “Scale” setting applies to all zones.2 LimitMake a setting for maximum volume.60 (–20dB) / 70 (–10dB) / 80 (0dB)Off (Default)2 Power On LevelDefine the volume setting that is active when the power is turned on.Last (Default) : Use the memorized setting from the last session.Mute : Always use the muting on condition when power is turned on.1 – 98 (–79dB – 18dB) : The volume is adjusted to the set level.2 Mute LevelSet the amount of attenuation when muting is on.Full (Default) : The sound is muted entirely.–40dB : The sound is attenuated by 40 dB down.–20dB : The sound is attenuated by 20 dB down.
