130AppendixTipsPlaybackConnectionsContentsFront panel Display Rear panel IndexRemoteSettings2 Pass SourceThe AV receiver will “pass through” the sources HDMI signal whenin standby.Last : Choose this option to “pass through” the last used HDMI inputvideo source.CBL/SAT (Default) / DVD / Blu-ray / GAME / AUX / MEDIA PLAYER :Choose one of these HDMI sources to be passed through when theAV receiver is in standby.%• “Pass Source” can be set when “HDMI Control” is set to “On” or “HDMIPass Through” is set to “On”.2 Pow.Off ControlLinks the power standby of this unit to external devices.All (Default) : If power to a connected TV is turned off independentlyof the input source, power to this unit is automaticallyset to standby.Video : With an input source being selected that is assigned either“HDMI” or “VIDEO” (vpage 133), when you turn thepower of the TV off, power to this unit is automatically set tostandby.Off : This unit does not link with power to a TV.On Screen Disp.Select the on-screen display user interface preferences.2 VolumeSets where to display the master volume level.Bottom (Default) : Display at the bottom.Top : Display at the top.Off : Turn display off.%• When the master volume display is hard to see when superimposed text(closed captioning) or movie subtitles are present, set to “Top”.2 InfoDisplays status of operation temporarily when the sound mode ischanged, or input source is switched. You can set whether or not toshow each of these status displays.On (Default) : Turn display on.Off : Turn display off.2 Now PlayingSets how long each menu is displayed when the input source is“NETWORK”, “iPod/USB”, or “TUNER”.Always On (Default) : Show display continuously.Auto Off : Show display for 30 seconds after operation.
