157AppendixTipsPlaybackConnectionsContentsFront panel Display Rear panel IndexRemoteSettingsFirmwareSet whether or not to check for firmware update, update the firmware,and display update and upgrade notifications.2 UpdateUpdate the firmware of the receiver.Check for Update : Check for firmware updates. You can also checkapproximately how long it will take to completean update.Update Start : Execute the update process. When the update starts,the menu screen is shut down. During the update, theprogress is shown on the display.%• If updating fails, the set automatically retries, but if updating is still notpossible, one of the messages shown below is displayed. If the display readsas shown below, check the settings and network environment, then updateagain.Display DescriptionUpdating fail Updating failed.Login failed Failure to log into server.Server is busy Server is busy. Wait a while then try again.Connection fail Failure in connecting to server.Download fail Downloading of the firmware has failed.2 NotificationsWhen the latest firmware is available, a notification message isdisplayed on the TV screen at power on.UpdateOn (Default) : Display update message.Off : Do not display update message.UpgradeThe notification message is displayed for about 20 seconds when thepower is turned on. Connect to broadband Internet (vpage 37)when using this function.On (Default) : Display upgrade message.Off : Do not display upgrade message.
