110AppendixTipsSettingsConnectionsContentsFront panel Display Rear panel IndexRemotePlaybackHDMI control functionA recent addition to the HDMI standard is CEC (Consumer Electronics Control), which allows control signals from one device to communicate withanother device via the HDMI cable connection. Not all HDMI-equipped devices have this capability.Setting procedure1 Set the HDMI output connector corresponding with theHDMI control function.Set “HDMI Control” (vpage 142) to “On”.2 Turn the power on for all the devices connected byHDMI cable.3 Set the HDMI control function for all devices connectedby HDMI cable.• Please consult the operating instructions for the connecteddevices to check the settings.• Carry out steps 2 and 3 should any of the devices be unplugged.4 Switch the television input to the HDMI input connectedto this unit.5 Switch the input source of this unit to check that videofrom the player connected by HDMI is played backcorrectly.6 When you turn the TV’s power to standby, check thatthe power of this unit also goes to standby.NOTE• Some functions may not operate depending on the connected TV or player. Checkthe owner’s manual of each device for details beforehand.• The HDMI ZONE2 function is not compatible with the HDMI control function.• When the HDMI ZONE2 function is used with “HDMI Control” in the menu set to“On”, the HDMI ZONE2 function may not fully work.
