143AppendixTipsPlaybackConnectionsContentsFront panel Display Rear panel IndexRemoteSettingsOutput SettingsMakes settings for video output.%• Can be set when each input source is assigned “HDMI”, “COMP” or “VIDEO”(vpage 147).• “Resolution”, “Progressive Mode” and “Aspect Ratio” can be set when “i/pScaler” is set to anything other than “Off”.• “Output Settings” can not be set when 4K signals are input.2 Video ModeMake settings for video processing.Auto (Default) : Process video automatically based on the HDMIcontent information.Game : Always process video for game content.Movie : Always process video for movie content.%• If “Video Mode” is set to “Auto”, the mode is switched according to theinput contents.2 Video ConversionThe input video signal is converted automatically in conjunction withthe connected TV (vpage 198 “Video conversion function”).On (Default) : The input video signal is converted.Off : The input video signal is not converted.2 i/p ScalerSets the video input signal for which i/p Scaler processing is performed.n When the input source is set other than to “iPod/USB” and“NETWORK”Analog (Default) : Use i/p (interlace-to-progressive) scaler function foranalog video signals.Analog & HDMI : Use i/p scaler function for analog and HDMI videosignal.HDMI : Use i/p scaler function for HDMI video signals.Off : Do not use i/p scaler function.n When the input source is set to “iPod/USB” and “NETWORK”On (Default) : Use i/p scaler function.Off : Do not use i/p scaler function.%• “Analog & HDMI” can be set for input sources for which an HDMI inputconnector is assigned.• Which items can be set depend on the input source assigned to each inputconnector.• This function is not effective when the input signal is “x.v.Color”, 3D, sYCC601 color, Adobe RGB color, Adobe YCC 601 color or computer resolutions.
