142AppendixTipsPlaybackConnectionsContentsFront panel Display Rear panel IndexRemoteSettings2 HDMI Pass ThroughSelects how the AV receiver will pass HDMI signals to the HDMIoutput in standby power mode.On : Passes the selected HDMI input through the AV receiver’s HDMIoutput when the AV receiver is in standby power mode.Off (Default) : No HDMI signals are passed through the AV receiver’sHDMI output in standby power mode.2 HDMI ControlYou can link operations with devices connected to HDMI andcompatible with HDMI Control.On : Use HDMI control function.Off (Default) : Do not use HDMI control function.%• Please consult the operating instructions for each connected device to checkthe settings.• Refer to “HDMI control function” (vpage 110) for more information aboutthe HDMI control function.NOTE• If the “HDMI Control” settings have been changed, always reset the powerto connected devices after the change.2 Pass Through SourceThe AV receiver will “pass through” the sources HDMI signal whenin standby.Last (Default) : Choose this option to “pass through” the last usedHDMI input video source.CBL/SAT / DVD / Blu-ray / GAME / AUX / MEDIA PLAYER / CDz :Choose this option to “pass through” the selected input source whenin standby.z “Pass Through Source” can be set when any of the HDMI connectors isassigned to “CD” for the input source in the “Input Assign” (vpage 146)setting.%• “Pass Through Source” can be set when “HDMI Control” is set to “On” or“HDMI Pass Through” is set to “On”.2 Power Off ControlLinks the power standby of this unit to external devices.All (Default) : If power to a connected TV is turned off independentlyof the input source, power to this unit is automaticallyset to standby.Video : With an input source being selected that is assigned either“HDMI”, “COMP” or “VIDEO” (vpage 147), when youturn the power of the TV off, power to this unit is automaticallyset to standby.Off : This unit does not link with power to a TV.
