172AppendixTipsPlaybackConnectionsContentsFront panel Display Rear panel IndexRemoteSettingsAuto StandbySets the time after which the unit automatically enters standby modewhen there are no audio or video signals input, and the unit is not operated.Before it enters the standby mode, “Auto Standby” is displayed on thedisplay of this unit and the menu screen.60 min : The unit goes into standby after 60 minutes.30 min (Default) : The unit goes into standby after 30 minutes.Off : The unit does not go into standby automatically.Front DisplayMakes settings related to the display on this unit.2 DimmerAdjust the display brightness of this unit.Bright (Default) : Normal display brightness.Dim : Reduced display brightness.Dark : Very low display brightness.Off : Turns the display off.%• You can also adjust the display by pressing DIMMER on the main unit.InformationShow information about receiver settings, input signals, etc.2 AudioShow the audio information for MAIN ZONE.Sound Mode : The currently set sound mode.Input Signal : The input signal type.Format : The number of input signal channels (presence of front,surround, LFE).Sample Rate : The input signal’s sampling frequency.Offset : The dialogue normalization correction value.Flag : This is displayed when inputting signals including a surroundback channel. “MATRIX” is displayed with Dolby Digital EXand DTS-ES Matrix signals, “DISCRETE” with DTS-ES Discretesignals.Dialogue normalization functionThis function is automatically activated when playing Dolby Digital,Dolby Digital Plus, Dolby TrueHD, DTS and DTS-HD sources.It automatically corrects the standard signal level for individualprogram sources.The correction value can be checked using the STATUS on the mainunit.Offset: - 4dBThe figure is the corrected value. This cannot be changed.
