43AppendixTipsSettingsPlaybackContentsFront panel Display Rear panel IndexRemoteConnectionsConnecting an external control deviceREMOTE CONTROL jacksIf this unit is installed in a location that is out of range of the signal fromthe remote control unit (such as when installed in a cabinet), you can stilloperate the unit and the devices connected to it by using a commerciallyavailable IR receiver.You can also use it to remotely control ZONE2 (another room).INCBL/SAT 1 CBL/SAT2 DVDY PB/CBDVD123PR/CRDC12V 150mA MAX.TRIGGER OUTSTRAIGHT CABLE1 CBL/SAT 2 DVD 3 Blu-ray 6 CD4 GAME 5 MEDIA PLAYER ZONE23 Blu-ray 4 MEDIA PLAYER1 CBL/SAT 2 DVD 5 CDBlu-rayINININCBL/SATAUDIOTV CDDVDCOAXIAL OPTICAL1122INAC INHDMIRS-232CARCMONITORVIDEO COMPONENT VIDEOAUDIODIGITAL AUDIO (ASSIGNABLE)(ASSIGNABLE)NETWORKOUTHDMI(ASSIGNABLE) (ASSIGNABLE)(ASSIGNABLE)ZONE21 2SUBWOOFERFRONT SURROUND BACKSURROUNDCENTERPRE OUTANTENNACOAX.75ΩFMASSIGNABLEIMPEDANCE : 6～16ΩSPEAKERSFRONT FRONT SURROUND SURROUNDCENTER SURROUND BACK SURROUND BACKIRINREMOTE CONTROLOUTAUXOUTDevice equipped with aREMOTE CONTROL IN jackInfraredretransmitter InfraredsensorOutputInputTRIGGER OUT jackWhen a device with TRIGGER IN jack is connected, the connected device’spower on/standby can be controlled through linked operation to this unit.The TRIGGER OUT jack outputs a maximum 12 V DC /150 mA electricalsignal.INCBL/SAT 1 CBL/SAT2 DVDY PB/CBDVD123PR/CRSTRAIGHT CABLEIRIN1 CBL/SAT 2 DVD 3 Blu-ray 6 CD4 GAME 5 MEDIA PLAYER3 Blu-ray 4 MEDIA PLAYER1 CBL/SAT 2 DVD 5 CDBlu-rayINININCBL/SATAUDIOTV CDDVDCOAXIAL OPTICAL1122INHDMIRS-232C REMOTE CONTROLOUTVIDEO COMPONENT VIDEOAUDIODIGITAL AUDIO (ASSIGNABLE)(ASSIGNABLE)NETWORK (ASSIGNABLE) (ASSIGNABLE)(ASSIGNABLE)ZONE21 2SUBWOOFERFRONT SURROUND BACKSURROUNDCENTERPRE OUTANTENNACOAX.75ΩFMIMPEDANCE : 6～16ΩSPEAKERSFRONT FRONT SURROUND SURROUNDCENTER SURROUND BACKDC12V 150mA MAX.TRIGGER OUT12 V DC/150 mA trigger-compatible deviceNOTE• Use a monaural mini-plug cable for connecting the TRIGGER OUT jack. Do not usea stereo mini-plug cable.• If the permissible trigger input level for the connected device is larger than 12 VDC/150 mA, or has shorted, the TRIGGER OUT jack cannot be used. In this case,turn off the power to the unit, and disconnect it.
