o HDMI PassThroughSelects how this unit will transmit HDMI signals to the HDMI output instandby power mode.On(Default):Transmits the selected HDMI inputthrough the AV receiver’s HDMI outputwhen this unit is in standby power mode.Off:No HDMI signals are transmitted throughthis unit’s HDMI output in standby powermode.o Pass SourceSets the HDMI connector that inputs HDMI signals when in standby.Last: The most recently used input source willgo into standby mode.CBL/SAT /DVD/Blu-ray / Blu-ray /Game / AUX /Media Player(Default : CBL/SAT)：Pass through the selected input source.0 “Pass Source” can be set when “HDMI PassThrough” is set to “On” or “HDMIControl” is set to “On”. (“HDMI PassThrough” (v p. 157), “HDMIControl” (v p. 158))o RC SelectSet whether to allow this unit to be turned on by the input source selectbutton on the remote control when this unit is on standby.Power On+Source(Default):The power of this unit is turned on andthe input source changes.Source Only:The HDMI input source changes whilethis unit is on standby. The power displayof this unit blinks when the input sourceselect button of the remote control ispressed.0 “RC Select” can be set when “HDMI Control” is set to “On” or “HDMIPassThrough” is set to “On”. (“HDMI PassThrough” (v p. 157), “HDMIControl” (v p. 158))Contents Connections Playback Settings Tips Appendix157Front panel Display Rear panel Remote Index
